The JTAG state machine is implemented in the hard logic of the MAX II device, and only the Parallel Flash Loader megafunction and user logic is implemented in programmable logic (see Figure 2). This implementation allows use of the JTAG state machine during normal operation of the MAX II CPLD, not just during device programming or testing.
Bring your PC to its limits with the freeware stress test tool HeavyLoad. HeavyLoad puts your workstation or server PC under a heavy load and lets you test whether they will still run reliably. The individual test methods employed by HeavyLoad can be customized to fit your needs.
Programming Standard Flash Memory Devices
Standard flash memory devices do not have JTAG scan connections for in-system programming. Normally, flash devices are programmed using the serial JTAG boundary scan chain of the device to which they are connected. This implementation is slow and inefficient because the programming instructions must be shifted through each I/O pin of the JTAG device one bit at a time until they reach the I/O pins connected to the flash device.
The Parallel Flash Loader megafunction and application note (AN 386: Using the MAX II Parallel Flash Loader with the Quartus® II Software (PDF)) provide a simple and efficient way to program flash devices through the MAX II device's JTAG interface. Using these tools, a special I/O scan chain can be defined to program and verify the flash device using custom commands. This implementation uses the JTAG state machine to access the MAX II device’s programmable logic to implement the flash memory driver and address decoder functions. The programming instruction is loaded directly into the flash device through the connecting I/O pins.
1. Read First: NI-DAQmx Compatibility with NI MAX
As you install and upgrade other NI software like LabVIEW, or other NI device drivers, your version of NI MAX will be upgraded if the installer contains a higher version. However, this alone will not break compatibility with NI-DAQmx. Higher versions of NI MAX will always support lower versions of NI-DAQmx.
If you are experiencing issues, most frequently conflicts arise between the version of NI-DAQmx and LabVIEW installed, or the version of NI-DAQmx and the version of Microsoft Windows that it supports.
2. Finding the Versions of NI MAX and NI-DAQmx Already Installed on your System
If you've already installed almost any NI software, you will have NI MAX installed on your system. Installing NI-DAQmx will also install NI MAX. To find the versions currently installed on your system:
NI MAX
The easiest way to tell which version of MAX you have installed is click Help»About from within MAX.
NI-DAQmx
Expand My System»Software in NI MAX to find the version of NI-DAQ or NI-DAQmx installed.
Determine the Version of the NI Software Installed on My Computerfurther explains how to determine which NI software is currently installed on your system.
3. NI MAX Version Installed with Each NI-DAQmx and NI-DAQ Driver Release
After the introduction of NI-DAQmx in 2003, Traditional NI-DAQ (Legacy), formerly NI-DAQ, was packaged into the same installer as NI-DAQmx. NI-DAQ 7.4 was the final driver release to include both drivers. Additional Traditional NI-DAQ (Legacy) solo installers are also listed below. See below for more information and download resources.
Max Loader Software Windows 74. Additional ResourcesNI-DAQmx
Traditional NI-DAQ (Legacy)
NI-DAQmx replaced Traditional NI-DAQ (Legacy) in 2003. NI strongly recommends using NI-DAQmx for new designs and migrating existing Traditional NI-DAQ (Legacy) applications to NI-DAQmx. Please review the Getting Started with NI-DAQmx guide for more information on migration.
NI MAX
As explained in Download the Latest Version of Measurement & Automation Explorer (MAX), NI MAX cannot be downloaded by itself, and is instead recommended to be installed along with the software or drivers you intend to use.
It supports on Windows, Mac OS X, GNU/Linux and other operating systems.It is a free, easy-to-use, multi-track audio editor and recorder. Best software to remove vocals. It can be very helpful for recording and also has the different kinds of voice changing effects.02:- WavosaurIt is an excellent and free audio editing software which supports VST plugins, batch conversions, loops, recording, etc. With the help of these software you can put your own voice in your favorite songs.Here is the list:-01:- AudacityAudacity is a popular program which includes in-built audio removing option. » » » Top 5 vocal removing softwaresHey folks, today we are gonna talk about the Programs that remove vocals from any song and create a karaoke.So, these software provides good audio quality with compression, stereo image separation, frequency spectrum, etc.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |